- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
-
Compactor Parts
Power UnitsElectrical PartsLimit/Safety/Photo/Press. SwitchesButtons/Switches/Keys/LegendsHydraulic PartsCylindersOther Compactor Parts30 MMPanels And ControlsMotorsMotor Starters / Transformers / FusesAccessories Electrical30 MM Key Switch30 MM Selector Switch30 MM Push Only Switch30 MM Legends30 MM Contacts And Replacement Keys22.5 MM
- Commercial Dumpster Parts
- Roll-Off Container Parts
-
Refuse Body Truck/Roll-off Hoist Parts
Heil Replacement PartsMcNeilus Replacement PartsTarp Systems & PartsRoll-Off Hoist/Hook Hoist PartsRoll-off / Hook Hoist PartsCurrotto Can Replacement PartsCables & StrapsRollers & AccessoriesSheave Pulleys & PinsHoist CylindersContainer Securement System & PartsRoll Off Hydraulics,Filters,& PneumaticsRoll-Off ElectricalCurotto Can Replacement CylindersCurotto Can Body Replacement PartsCurotto Can Grabber Beam PartsCurotto Can Slide Assembly PartsCurotto Can Hydraulics & PneumaticsOther Manufacturer Replacement Parts
Choose Your Bottom
60 X 35 EID BTM WITH 1" OFFSET RAILS EPA COMP NO HOLES
70.5 X 77.5 EID BTM EPA COMP NO HOLES
70 X 84 EID BTM 8" RISERS EPA COMP NO HOLES
Suggested Product Substitute
READY BOTTOM KIT FITS 7272 THROUGH 7290 - 2.5" X 3" - 6" RISERS
Part # : B.K.7272-90
72.5 X 107 BTM EPA COMP NO HOLES
72.5 X 72 BTM EPA COMP NO HOLES
Part # : B.7272
72.5 X 80 BTM EPA COMP NO HOLES
Part # : B.7280
72.5 X 66 BTM EPA COMP NO HOLES
Part # : B.7266
72.5 X 54 BTM SLANT EPA COMP NO HOLES
Part # : B.7254.S
72.5 X 54 BTM EPA COMP NO HOLES
Part # : B.7254
72.5 X 57 BTM EPA COMP NO HOLES
Part # : B.7257
72.5 X 36 BTM EPA COMP NO HOLES
Part # : B.7236
Non-Standard Dumpster Bottoms — Built to Order
Non-standard and custom dumpster bottoms — fabricated to your container's exact dimensions. For legacy Wastequip models, oversized containers, custom-fabricated bins, and specialty applications. Typical lead time is 1-2 weeks.
What this page covers
Not every container fits a standard catalog bottom. Older Wastequip dumpsters (especially pre-2010), custom-fabricated bins built by regional fabricators, oversized roll-off-style commercial containers, and specialty applications (sludge boxes, animal-control containers, vault waste) all need bottoms made to spec.
PRT's fabrication shop builds non-standard bottoms in any reasonable dimension using the same heavy-gauge mild steel as our standard bottoms. We add reinforcement gussets, fork-tube cutouts, drain fittings, and any specialty features your container requires. Most orders ship in 1-2 weeks from the time we have final dimensions.
How to choose
Provide the container's exact outer dimensions (length, width, depth), the configuration (front-load fork tube spacing, rear-load hinge mounting, or specialty), and any special features (drain placement, reinforcement requirements, painted color). PRT customer service will quote based on those specs.
The easiest way to spec a non-standard bottom is to send PRT a photo of the existing bottom with a tape measure laid across it, plus the container's outer dimensions. We'll generate the fabrication drawing for your approval before cutting steel.
Common non-standard bottom applications
- Legacy Wastequip containersPre-2010 models with non-current dimensions.
- Custom-fabricated commercial binsRegional fabricator builds with unique footprints.
- Oversized front-load containersAbove-8-yard or non-standard yard sizes.
- Specialty containersSludge boxes, animal control, vault waste, custom geometries.
- Reinforced bottoms for hazardous serviceExtra-gauge steel with specialty drain configurations.
- Painted to match brand colorsOptional on custom orders.
Frequently asked questions
How long does it take to fabricate a custom dumpster bottom?
Typically 1-2 weeks from the time we have final dimensions and your approval of the fabrication drawing. Rush fabrication (under 7 days) is available for an upcharge.
How do I provide the dimensions for a custom bottom?
Send PRT the container's outer dimensions (length, width, depth), fork-tube spacing if front-load, hinge-mount geometry if rear-load, and a photo of the existing bottom. We generate a fab drawing for your approval before cutting steel.
Can PRT match an exact replacement of a legacy Wastequip bottom?
Yes. Send us the container model number (or a photo of the data plate) and we'll match the OEM dimensions and reinforcement pattern. We've fabricated bottoms for most pre-2010 Wastequip models at some point.
Are non-standard bottoms more expensive than standard?
Typically 25-50% more, depending on size and complexity. The premium is for the fabrication time, not the steel — material cost is similar.