- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
-
Compactor Parts
Power UnitsElectrical PartsLimit/Safety/Photo/Press. SwitchesButtons/Switches/Keys/LegendsHydraulic PartsCylindersOther Compactor Parts30 MMPanels And ControlsMotorsMotor Starters / Transformers / FusesAccessories Electrical30 MM Key Switch30 MM Selector Switch30 MM Push Only Switch30 MM Legends30 MM Contacts And Replacement Keys22.5 MM
- Commercial Dumpster Parts
- Roll-Off Container Parts
-
Refuse Body Truck/Roll-off Hoist Parts
Heil Replacement PartsMcNeilus Replacement PartsTarp Systems & PartsRoll-Off Hoist/Hook Hoist PartsRoll-off / Hook Hoist PartsCurrotto Can Replacement PartsCables & StrapsRollers & AccessoriesSheave Pulleys & PinsHoist CylindersContainer Securement System & PartsRoll Off Hydraulics,Filters,& PneumaticsRoll-Off ElectricalCurotto Can Replacement CylindersCurotto Can Body Replacement PartsCurotto Can Grabber Beam PartsCurotto Can Slide Assembly PartsCurotto Can Hydraulics & PneumaticsOther Manufacturer Replacement Parts
6X2 THERMOPLASTIC RUBBER W/ ROLLER BEARINGS SWIVEL CASTERS
6X2 THERMOPLASTIC RUBBER WHEEL WITH ROLLER BEARINGS
6X2 THERMOPLASTIC RUBBER W/ ROLLER BEARINGS RIGID CASTERS
6X2 NO FLAT PNEUMATIC SWIVEL CASTER
6X2 POLYO SWIVEL CASTER KIN.P.LSS LARGE BORE
6X2 "D" SWIVEL CASTER W/ROLLER BEARING
Part # : P.62CPRBSW
6X2 "D" RIGID CASTERS W/ROLLER BEARING
Part # : P.62CPRBRG
76.5 UNIVERSAL HINGE ROD
Part # : P.HR.76.5
CASTER PAD W/NUT & BOLT FULL BODY
Part # : P.CP2
6X2 "D" SWIVEL CASTER
Part # : P.62CPSW
6X2 "D" RIGID CASTERS
Part # : P.62CPRG
HINGE EAR (DUAL HOLE)
Part # : P.HE1
Other Specialty Dumpster Casters
Specialty and non-standard casters for unusual dumpster applications — brake-equipped casters, specialty tread materials, custom configurations, and casters for unusual mounting requirements.
What this page covers
Most commercial dumpster caster needs are covered by mold-on-rubber, polyurethane, phenolic, and steel in standard sizes. But there's a long tail of specialty applications: brake-equipped casters for sloped installations, ESD-conductive casters for clean-room waste, low-temperature polyurethane for freezer applications, casters for non-standard mounting plates, and so on.
PRT stocks the most-requested specialty casters and can source or fabricate custom configurations for unusual requirements.
How to choose
Match by load rating, wheel diameter, mount type (bolt-on or weld-on), and caster type (swivel or rigid).
Send PRT a photo of your existing caster with the container model number and we'll confirm fitment.
In stock options
- Brake-equipped castersTotal-lock brakes for sloped installations.
- ESD-conductive castersFor clean-room and electronics-waste applications.
- Low-temperature polyurethane castersFor freezer and sub-zero environments.
- Specialty mounting castersFor non-standard mounting plate configurations.
- Custom castersFabricated to specification for unusual requirements.
Frequently asked questions
Do you have casters with brakes for sloped installations?
Yes. Total-lock brake casters lock both the wheel and the swivel in one motion, holding the dumpster in place on sloped surfaces.
Are ESD-conductive casters worth the premium for waste applications?
Only in specific environments — clean rooms, electronics manufacturing waste, or sensitive electrical service environments. For standard commercial waste, regular casters are fine.
What temperature can low-temperature polyurethane casters tolerate?
Continuous service to -40°F or lower. Standard polyurethane stiffens and cracks below -20°F.
Can PRT make a custom caster for an unusual mounting plate?
Yes. Send the mounting plate dimensions and we'll quote a custom-mount caster.