- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
-
Compactor Parts
Power UnitsElectrical PartsLimit/Safety/Photo/Press. SwitchesButtons/Switches/Keys/LegendsHydraulic PartsCylindersOther Compactor Parts30 MMPanels And ControlsMotorsMotor Starters / Transformers / FusesAccessories Electrical30 MM Key Switch30 MM Selector Switch30 MM Push Only Switch30 MM Legends30 MM Contacts And Replacement Keys22.5 MM
- Commercial Dumpster Parts
- Roll-Off Container Parts
-
Refuse Body Truck/Roll-off Hoist Parts
Heil Replacement PartsMcNeilus Replacement PartsTarp Systems & PartsRoll-Off Hoist/Hook Hoist PartsRoll-off / Hook Hoist PartsCurrotto Can Replacement PartsCables & StrapsRollers & AccessoriesSheave Pulleys & PinsHoist CylindersContainer Securement System & PartsRoll Off Hydraulics,Filters,& PneumaticsRoll-Off ElectricalCurotto Can Replacement CylindersCurotto Can Body Replacement PartsCurotto Can Grabber Beam PartsCurotto Can Slide Assembly PartsCurotto Can Hydraulics & PneumaticsOther Manufacturer Replacement Parts
TAPERED BOLT FOR D18718A WEAR STRIP
LEFT SIDE MOUTING BRACKET (NEW STYLE)
RIGHT SIDE MOUTING BRACKET (NEW STYLE)
EJECT CYL, 3 STAGE, 28YD FL/33YD SL
Part # : T.CYL.001-7041
7/8" X 80' ROLLOFF CABLE WITH BUTTON
Part # : T.GB.7/8X80B
ARM EXENTENSION CYLINDER
Part # : T.CYL.HR4752
3" x 4" x 2" SIDE ROLLER
Part # : T.GB.521AO
SPRING LOADED ROLLER, UNIVERSAL (108")
Part # : T.PI.H7002C
ARM CYLINDER, HP, FEL (CUSHIONED)
Part # : T.CYL.001-7057
Pioneer Tarp Pivot Assembly Parts
Replacement pivot assembly parts for Pioneer Tarp systems — pivot bushings, pins, mounting hardware, and complete pivot assemblies. The rotating hardware at the base of the arm assembly.
What this page covers
Pivot assemblies handle the rotational motion of the arm — every tarp deployment and retraction cycle stresses the pivot bushings and pins. Worn pivot bushings cause arm wobble, accelerated tarp wear, and eventually pivot pin shear.
PRT stocks pivot bushings, pins, and complete pivot assemblies for Pioneer Tarp installations.
How to choose
Match by Pioneer Tarp model and pivot pin diameter.
Replace bushings and pins together — worn bushings damage new pins quickly.
Pivot assembly options
- Pivot bushingsBrass and polymer bushings.
- Pivot pinsHardened steel pins.
- Mounting bracketsPivot-side and frame-side hardware.
- Complete pivot assembliesFull pivot with bushing, pin, and mounting.
- Grease fittingsFor periodic pivot maintenance.
- Replacement sealsFor sealed-bearing pivot designs.
Frequently asked questions
How do I know if my Pioneer Tarp pivot needs replacement?
Visible arm wobble or play at the pivot point. Excessive grease leakage. Pivot pin elongation visible on inspection.
Are Pioneer Tarp pivot bushings made of brass or polymer?
PRT stocks both. Brass bushings for heavy-duty applications; polymer bushings for lower-load applications and quieter operation.
Should I replace pivot pins and bushings together?
Yes. Worn bushings have ovalled the bore and the pivot pin has matching wear — using a new pin in a worn bushing fails quickly.
How often should I grease Pioneer Tarp pivots?
Monthly in standard service; weekly in high-cycle applications. Use a light hand — over-greasing can damage seals.