Compactor Cylinder Accessories — Mounts, Pins, Seal Kits

What this page covers

Cylinder accessories are the small parts that determine whether a cylinder replacement is a 30-minute job or a 3-hour fight. Clevis pins shear, mounting brackets crack, rod end fittings strip — and when any of those happen, you need the supporting hardware ready to install with the new cylinder.

PRT stocks the most-replaced cylinder accessories: clevis pins and snap rings, mounting brackets, rod end fittings (clevis, eye, threaded), seal kits for in-place rebuild, and hydraulic fittings sized to common cylinder ports.

How to choose

Match accessories to the cylinder by bore, rod, mounting style, and port size. Rod end fittings are sized by rod thread; mounting brackets by mounting hole pattern; seal kits by cylinder model.

When replacing a cylinder, always replace the clevis pins and snap rings too. Re-using worn pins damages the new cylinder's mounting.

Cylinder accessory categories

• Clevis pins and snap ringsReplacement pins in standard hardened sizes.
• Mounting bracketsCylinder-side and structure-side mounting hardware.
• Rod end fittingsClevis ends, eye ends, and threaded rod ends.
• Seal kits / rebuild kitsComplete sets for in-place cylinder rebuild.
• Hydraulic fittingsNPT and SAE O-ring fittings sized to common cylinder ports.
• Cylinder repair servicesBore re-machining and rod re-chroming for high-value cylinders.