- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
-
Compactor Parts
Power UnitsElectrical PartsLimit/Safety/Photo/Press. SwitchesButtons/Switches/Keys/LegendsHydraulic PartsCylindersOther Compactor Parts30 MMPanels And ControlsMotorsMotor Starters / Transformers / FusesAccessories Electrical30 MM Key Switch30 MM Selector Switch30 MM Push Only Switch30 MM Legends30 MM Contacts And Replacement Keys22.5 MM
- Commercial Dumpster Parts
- Roll-Off Container Parts
-
Refuse Body Truck/Roll-off Hoist Parts
Heil Replacement PartsMcNeilus Replacement PartsTarp Systems & PartsRoll-Off Hoist/Hook Hoist PartsRoll-off / Hook Hoist PartsCurrotto Can Replacement PartsCables & StrapsRollers & AccessoriesSheave Pulleys & PinsHoist CylindersContainer Securement System & PartsRoll Off Hydraulics,Filters,& PneumaticsRoll-Off ElectricalCurotto Can Replacement CylindersCurotto Can Body Replacement PartsCurotto Can Grabber Beam PartsCurotto Can Slide Assembly PartsCurotto Can Hydraulics & PneumaticsOther Manufacturer Replacement Parts
6X2 "D" SWIVEL CASTER W/ROLLER BEARING
Part # : P.62CPRBSW
6X2 "D" RIGID CASTERS W/ROLLER BEARING
Part # : P.62CPRBRG
76.5 UNIVERSAL HINGE ROD
Part # : P.HR.76.5
CASTER PAD W/NUT & BOLT FULL BODY
Part # : P.CP2
6X2 "D" SWIVEL CASTER
Part # : P.62CPSW
6X2 "D" RIGID CASTERS
Part # : P.62CPRG
HINGE EAR (DUAL HOLE)
Part # : P.HE1
6" Mold-on-Rubber Dumpster Casters
6-inch mold-on-rubber casters — the standard size for commercial 2-6 yard dumpsters. Quiet rolling, floor-friendly tread, and load ratings for standard commercial service.
What this page covers
The 6-inch wheel diameter is the industry standard for commercial dumpster casters because it balances ground clearance (clears most paving cracks and floor seams) with mounting compatibility (matches standard caster mounting plates). Mold-on-rubber tread is the right choice for indoor service, finished floors, and noise-sensitive applications.
PRT stocks 6-inch mold-on-rubber casters in swivel and rigid configurations, with load ratings appropriate for 2-yard through 6-yard commercial dumpsters.
How to choose
Match by load rating, wheel diameter, mount type (bolt-on or weld-on), and caster type (swivel or rigid).
Send PRT a photo of your existing caster with the container model number and we'll confirm fitment.
In stock options
- 6" mold-on-rubber swivel casterFor steering corners of the dumpster.
- 6" mold-on-rubber rigid casterFor stability and straight-line rolling.
- 500 lb load ratingStandard for 2-4 yard dumpsters.
- 750 lb load rating heavy-dutyFor 6-yard and heavier applications.
- Bolt-on plate mountingStandard NEMA hole pattern.
- Total-lock brakesOptional brake hardware for outdoor or sloped installations.
Frequently asked questions
What load rating do I need for a 6-inch mold-on-rubber caster?
Match the load rating to your container loaded weight divided by 4 with a 25% safety margin. A typical 4-yard dumpster loaded to 1,200 lbs needs 375 lb-rated casters minimum; 500 lb-rated is the practical choice for service margin.
Are 6-inch mold-on-rubber casters good for outdoor use?
They work outdoors but wear faster than polyurethane in continuous outdoor service. For outdoor-only routes, polyurethane is the better long-term choice.
Do PRT 6-inch mold-on-rubber casters fit Wastequip dumpsters?
Yes. PRT casters use standard mounting plate hole patterns compatible with Wastequip, JV Cram-a-lot, and most other major dumpster manufacturers.
What is the typical wear life on a 6-inch mold-on-rubber caster?
3-5 years in standard indoor commercial service.