- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
-
Compactor Parts
Power UnitsElectrical PartsLimit/Safety/Photo/Press. SwitchesButtons/Switches/Keys/LegendsHydraulic PartsCylindersOther Compactor Parts30 MMPanels And ControlsMotorsMotor Starters / Transformers / FusesAccessories Electrical30 MM Key Switch30 MM Selector Switch30 MM Push Only Switch30 MM Legends30 MM Contacts And Replacement Keys22.5 MM
- Commercial Dumpster Parts
- Roll-Off Container Parts
-
Refuse Body Truck/Roll-off Hoist Parts
Heil Replacement PartsMcNeilus Replacement PartsTarp Systems & PartsRoll-Off Hoist/Hook Hoist PartsRoll-off / Hook Hoist PartsCurrotto Can Replacement PartsCables & StrapsRollers & AccessoriesSheave Pulleys & PinsHoist CylindersContainer Securement System & PartsRoll Off Hydraulics,Filters,& PneumaticsRoll-Off ElectricalCurotto Can Replacement CylindersCurotto Can Body Replacement PartsCurotto Can Grabber Beam PartsCurotto Can Slide Assembly PartsCurotto Can Hydraulics & PneumaticsOther Manufacturer Replacement Parts
PROOF COIL CHAIN 3/16" (PER FOOT)
6X2 "D" SWIVEL CASTER W/ROLLER BEARING
Part # : P.62CPRBSW
6X2 "D" RIGID CASTERS W/ROLLER BEARING
Part # : P.62CPRBRG
76.5 UNIVERSAL HINGE ROD
Part # : P.HR.76.5
CASTER PAD W/NUT & BOLT FULL BODY
Part # : P.CP2
6X2 "D" SWIVEL CASTER
Part # : P.62CPSW
6X2 "D" RIGID CASTERS
Part # : P.62CPRG
HINGE EAR (DUAL HOLE)
Part # : P.HE1
Dumpster Lock Accessories — Hasps, Staples, Hardware
Mounting hardware and accessories for dumpster locking systems — hasps, staples, brackets, lock-bar mounting hardware, replacement lock cylinders, and replacement keys.
What this page covers
Lock accessories are the small parts that mount the lock to the dumpster — hasps welded to the lid that the padlock passes through, staples welded to the container body that the hasp engages, brackets that hold lock bars in place, and the replacement keys and cylinders for existing manual locks.
PRT stocks these accessories as standalone items for repair, upgrade, or new installations.
How to choose
Match by accessory type and the locking system it serves. Replacement keys require the lock's serial or key code; replacement cylinders require the lock model.
For lost keys, PRT can supply a replacement if you have the key code stamped on the lock. Without a code, the lock typically needs to be replaced entirely.
Lock accessory categories
- Hasps and staplesWelded-on hardware for padlock installation.
- Lock-bar mounting bracketsBrackets that hold lock bars in correct position.
- Replacement lock cylindersFor manual lock bars with worn or damaged cylinders.
- Replacement keysWhen original keys are lost (requires key code).
- Lock-bar attachment hardwareBolts, washers, and weld-on hardware.
- Tamper-resistant fastenersFor high-risk routes.
Frequently asked questions
Can I retrofit hasps and staples to a dumpster that didn't have locks?
Yes. Hasps and staples are welded-on or bolted-on retrofits. PRT supplies the hardware with installation instructions.
How do I get replacement keys for a manual dumpster lock?
Provide the key code (usually stamped on the lock face or in the lock's documentation). PRT can match the code and supply replacement keys.
Can lock cylinders be replaced without replacing the entire lock bar?
Often yes — most manual lock bars have removable cylinder assemblies. Verify by examining your existing lock bar; PRT customer service can confirm compatibility.
What's the difference between a hasp and a lock bar?
A hasp is the hinged metal loop that a padlock passes through. A lock bar is a longer metal bar with an integrated lock cylinder. Hasps are for padlock systems; lock bars are integrated locking systems.