- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
-
Compactor Parts
Power UnitsElectrical PartsLimit/Safety/Photo/Press. SwitchesButtons/Switches/Keys/LegendsHydraulic PartsCylindersOther Compactor Parts30 MMPanels And ControlsMotorsMotor Starters / Transformers / FusesAccessories Electrical30 MM Key Switch30 MM Selector Switch30 MM Push Only Switch30 MM Legends30 MM Contacts And Replacement Keys22.5 MM
- Commercial Dumpster Parts
- Roll-Off Container Parts
-
Refuse Body Truck/Roll-off Hoist Parts
Heil Replacement PartsMcNeilus Replacement PartsTarp Systems & PartsRoll-Off Hoist/Hook Hoist PartsRoll-off / Hook Hoist PartsCurrotto Can Replacement PartsCables & StrapsRollers & AccessoriesSheave Pulleys & PinsHoist CylindersContainer Securement System & PartsRoll Off Hydraulics,Filters,& PneumaticsRoll-Off ElectricalCurotto Can Replacement CylindersCurotto Can Body Replacement PartsCurotto Can Grabber Beam PartsCurotto Can Slide Assembly PartsCurotto Can Hydraulics & PneumaticsOther Manufacturer Replacement Parts
Specialty Dumpster Lids
Specialty and non-standard dumpster lids — universal cuttable HDPE, steel lids for industrial use, side-load configurations, and custom-fit options for legacy containers. When the standard S-series or D-series doesn't fit, this is where to look.
What this page covers
Not every dumpster fits a standard catalog lid. Older containers, custom-fabricated bins, specialty applications (vaults, sludge boxes, animal-control containers), and orphaned brands all need solutions that the mainstream lid line doesn't cover. PRT's specialty lid range fills that gap.
This page is the entry point to four sub-categories: Universal cuttable lids (one lid, cut to any size), Steel lids (for the most abusive environments), Side-load lids (specialty geometry), and accessories. Browse below or contact PRT customer service if you can't find what fits.
How to choose
Start with the most-fitting sub-category: Universal if your container is older or non-standard, Steel if the environment destroys HDPE, Side Load if your container has a side-loading top geometry.
When in doubt, send a photo of the container with a tape-measure overlay. PRT identifies most non-standard lids on first look.
Specialty lid options
- Universal Lids (Cuttable)One lid blank, cut to size in the field. Fits any container.
- Steel LidsHeavy-gauge steel for industrial, abusive, or fire-risk environments.
- Side Load LidsFor containers loaded through the top side rather than fork-tube front.
- Custom-fit lidsMade-to-order for legacy or non-standard containers.
- Vault and animal-control lidsSpecialty geometries for niche applications.
Frequently asked questions
Why would I choose a universal cuttable lid over a sized lid?
When the container's exact size isn't a standard catalog match — older Wastequip models, container-rebuilt-from-frame containers, or custom-fabricated bins. Universal lids ship as oversized blanks that you cut to size in the field.
Are PRT steel lids fire-rated?
PRT carries both standard steel lids and UL fire-rated options. Specify the rating when you order; standard steel lids are not certified for hazardous-waste applications.
What's a 'side load' lid?
A lid for containers that load through a top-side opening rather than via fork tubes on the front. Common on smaller specialty containers (animal control, vault waste, sludge boxes). The lid geometry is different — flatter, wider, with a different hinge orientation.
Can PRT make a custom lid for an unusual container?
Yes. We fabricate custom HDPE and steel lids to any spec. Provide container dimensions, photos, and any special requirements (color, hinge geometry, UL rating). Typical lead time is 7–14 business days.